What thickness options do you offer for this panel?

Common thickness options are 21mm and 27mm. Choose 21mm for general daily routines and 27mm when higher stiffness is preferred.

Does the panel come with edge sealing?

Edge sealing is available on request. It helps reduce moisture pickup at exposed edges during storage and repeated use.

How do you improve reuse cycles on site?

Store panels flat and off wet ground, use a suitable release agent, clean after stripping, and protect edges during lifting and stacking.

Can you supply custom sizes for European buyers?

Yes. Cut sizes can be supplied on request with stated tolerance control and a packing plan matched to your handling method.

3-Ply Yellow Formwork Panel

Q: What is a 3-ply yellow formwork panel used for?

It is used for concrete formwork such as slabs, walls, and beams where crews need practical handling and repeatable daily reuse.

3-Ply Yellow Formwork Panel

Short Description:

Film faced plywood should prove its value on site, not on paper. ROCPLEX Form Birch is a premium film faced plywood built for high reuse in concrete formwork. It aims to stay flat, release clean, and keep a stable face across repeat pours. The build focuses on three things that drive real cycles: 220 g/m² phenolic film on both sides, A-bond WBP bonding, and four-coat sealed edges. Full birch construction adds strength and stiffness for demanding routines. Share your size and cycle target for a reuse-grade offer and packing plan.

Send email to us

Product Detail

3-Ply Yellow Formwork Panel Built for Daily Formwork

ROCPLEX^® 3-ply yellow formwork panel is designed for practical slab and wall work where speed, consistency, and basic durability matter. Buying formwork panels is not about sheets. It is about repeat results. When the panel stays stable and edges stay protected, setups move faster and rework drops.

3-ply yellow formwork panel used on a construction site for routine concrete formwork, showing easy handling during repeated setups — **Jobsite Practical Use**
Built for routine forming where crews need easy handling and steady results across repeated setups.

3-ply yellow formwork panel sheets stacked neatly, presenting comprehensive size range for standard sizes and custom cutting requests — **Comprehensive Size Range**
Built for varied jobsite layouts where buyers need flexible sizing and clean planning. Standard sizes cover most routines, while custom cutting supports special setups.

3-ply yellow formwork panel packs in warehouse with export stacking, showing edge protection focus for storage and shipping — **Edge Protection Focus**
Edges often fail first. Optional edge sealing helps reduce moisture pickup at exposed sides.

3-ply yellow formwork panel close-up showing stable 3-layer build and clean edges for flatter alignment in everyday formwork work — **Stable 3-Layer Build**
Three-layer construction supports flatness and steadier alignment in everyday formwork work.

Steady Reuse, Lower Cost per Pour

Lower cost per pour comes from steady reuse, not from price alone. ROCPLEX keeps the key details consistent—stable build, controlled thickness, and edge protection options—so buyers can reorder with confidence and run formwork programs with less variation.

Why choose a 3-ply yellow formwork panel?

Clear, easy checks during setup

The yellow face improves visibility on site. Crews can spot dirt, damage, and wear earlier, which supports faster checks.

Handling that stays practical

This 3 ply formwork panel stays easy to lift, place, and stack. It suits daily routines where time matters.

Thickness options that fit real systems

21mm works well for many standard routines. 27mm is often chosen when higher stiffness is preferred.

A purchasing spec that stays consistent

Wholesalers and contractors need repeatable supply. Clear thickness options and packing rules make reorders easier.

3-ply yellow formwork panel export packing by ROCPLEX with strapped pallets and warehouse stacking for Europe shipments — 3-ply yellow formwork panel export packing with strapped pallets for stable handling and Europe shipments.

Yellow Coated Surface (Daily Formwork Finish)

The face is where wear starts. A 3 ply yellow formwork panel uses a coated surface for practical daily forming. Face care still matters. Use a suitable release agent, clean after striking, and avoid aggressive scraping. Good routine improves reuse and keeps concrete finish more consistent.

Bonding for Wet Concrete Work (Exterior Level)

Bonding decides panel life. If bonding fails, reuse drops fast. This concrete formwork panel is produced with exterior bonding options suitable for wet concrete routines. If your tender requires a specific standard list, include it in your RFQ so we match the correct documentation pack and adhesive level.

3-ply yellow formwork panel close-up by ROCPLEX showing branded face, smooth yellow coating, and clean panel edges for concrete formwork — ROCPLEX yellow shuttering panel branding and a smooth coated face for routine concrete formwork.

How to Specify 3-Ply Yellow Formwork Panel for Smooth Site Work

A stable program starts with one question: what routine are you running on site—fast slab cycles, wall work, or mixed use? Once the routine is clear, lock three details first: thickness option (21mm or 27mm), edge protection, and size plan. After that, align packing to your yard handling to reduce corner damage before panels reach the formwork line.

3-Ply Yellow Formwork Panel Specifications

Panel sizes (common ranges)

1000 × 2000 / 2500 / 3000 mm
1200 / 1220 / 1250 / 1500 / 1525 × 2400 / 2440 / 2500 / 2700 / 3000 / 3050 / 3600 / 3660 mm
Cut sizes on request

Tolerances (typical)

Size tolerance (length/width): ±1 mm per metre
Squareness tolerance: ±1 mm per metre of diagonal length

Thickness options (common)

21mm (daily handling, value-led routines)
27mm (higher stiffness preference)

Edge sealing system

Optional edge sealing is recommended when panels face frequent moisture, rough storage, or repeated forklift handling. Edge protection helps reduce water entry at the sides, where early damage often begins.

3-Ply Yellow Formwork Panel Mechanical Performance Data (Snapshot)

Moisture content is stated as 8–14%. Key bending data is listed below.

Thickness (mm)	MOE EmII (N/mm²)	MOE EmI (N/mm²)	Strength fmII (N/mm²)	Strength fmI (N/mm²)
12	13722	8516	65.7	45.1
15	13509	8597	67.3	45.9
18	14257	9032	73.6	52.6
21	14990	9159	77.1	50.7
25	15731	9573	79.2	53.5

Performance Data and Quality Control (On Request)

Performance depends on species, density, thickness option, and handling routine. For controlled projects, ROCPLEX can provide a specification summary and available test data based on your order requirement. Share your target application and we will prepare the most relevant pack.

3-Ply Yellow Formwork Panel Grades and Options (Buyer Spec)

To avoid mixed batches, it helps to specify:

Thickness option: 21mm or 27mm
Size (L × W) and cut-size plan
Edge sealing requirement
Face requirement (yellow coated)
Packing method and unit labels
Documentation needs (CoC, test data, MSDS where required)

3-Ply Yellow Formwork Panel Packaging (Fast Yard Handling)

Packaging affects damage rate and handling speed. Clear unit counts make yard checks faster and loading cleaner. If you run repeat programs, packing can be aligned to your forklift routine and container plan—straps, corner protection, and clear pallet labels.

Thickness	Pcs per unit
12mm (1/2″)	75
15mm (5/8″)	60
18mm (3/4″)	50
21mm (7/8″)	43
25mm (1″)	36

3-Ply Yellow Formwork Panel Applications for Concrete Formwork Panels

This 3-ply yellow formwork panel is generally used for:

Slab and deck formwork
Wall and column shuttering
Beam edges and general forming work
Daily jobsite tasks where panels are moved and stacked often

Documentation and Program Support

Professional buying needs clear paperwork. ROCPLEX can prepare a documentation pack based on your market needs, including specification summaries and supporting files where applicable. FSC or PEFC Chain of Custody can be provided on request if your order requires it.

ROCPLEX 3-Ply Yellow Formwork Panel Certified By

For controlled projects, documentation matters. FSC or PEFC Chain of Custody can be supplied per order, and the certificate details can be shared for verification. If your tender lists specific standards, include them in your RFQ so we match the correct pack.

Request a Quote (Fast RFQ)

To quote the right 3-ply yellow formwork panel, please share the details below. This helps us match the correct spec, packing, and lead time.

RFQ fields

Product: ROCPLEX 3-ply yellow formwork panel
Size (L × W)
Thickness option: 21mm or 27mm
Edge sealing: yes / no
Volume (sheets or containers) and delivery schedule
Destination port and incoterms
Documentation needs (CoC, test data, MSDS)

Request a Quote
Send your requirements. We will respond with a clear specification and packing plan.

To quote the right reuse-grade premium film faced plywood, please share the details below. This helps us match the correct spec, packing, and lead time.

Request a Quote

Send your requirements and cycle target. We will respond with a clear specification and packing plan.

FAQ

Q1: What is a 3-ply yellow formwork panel used for?

A: It is used for concrete formwork where stable handling and steady daily reuse matter.

Q2: 21mm vs 27mm—how do I choose?

A: 21mm is common for daily routines and easier handling. 27mm is chosen when higher stiffness is preferred. Share your support spacing and use case, and we will advise.